Directional Triple Vane Ball Vent No Hose Connector.
A directional triple vane eyeball vent made from injection moulded high-strength ABS plastic with optional screw on hose connector. The vent has a triple vanve directional flute to direct the airflow where required, these are available singularly or with a hose connector fit suit 51 or 63mm air ducting.
This is not a closable vent, simply turning the vent 90 degrees will not block off the air flow through the eyeball entirely.
| Specification | Metric | Imperial & Other |
| Outer Diameter | 62.8 mm | 2.47" |
| Hole Size | 57.5 mm | 2.25" |
| Max Panel Thickness | 5.6 mm | 0.22" |
| Minimum Temperature | -20 °C | -4 °F |
| Maximum Temperature | 80 °C | 176 °F |
| Material | High Strength ABS | |
| Part Number | 9F0-4DB-380 | |
Product Dimensions
ATTENTION
- Please double check that you are ordering the correct diameter for your application prior to checkout.
| Air Vent Type | Ball Vane |
|---|---|
| Manufacturer | T7Design |
Write Your Own Review