T7Design Silicone Hose Blanking Cap - 19mm ID, 3Ply

T7Design Silicone Hose Blanking Cap - 19mm ID, 3Ply - Black

Our highly flexible silicone hoses are manufactured to the highest standard and are perfect for many applications including radiator pipes and air/intake pipes within modern engines. Depending on the diameter required, the hoses come with 3-5 ply of polyester fabric with a minimum wall thickness of 4.0mm. The hoses are available from 6mm to 152mm inside diameter sizes and all meet the requirements of SAE J20R1 Class A. Working Temperature -50°C to +180°C. Material Specification Silicone CompoundTested to BS903 at pressed cured for 5 minutes at +115°C. Hardness (IHRD) 65 + 5, Density (g/cm3) 1.26 + 0.03, Tensile strength (Mpa) 7 min, Elongation at break (%) 200 min, Tear strength (KN/m) 11 min, Compression set (%) 18 Max.

Specification	Metric	Imperial & Other
Inside Diameter	Ø 19mm	Ø 0.748031inch
Length	40mm	1.5748inch
Hose Wall Thickness	4.0mm	0.15748inch
Working Pressure	14.7 BAR	214 PSI
Burst Pressure	44 BAR	642 PSI
Minimum Temperature	-50 °C	-58 °F
Maximum Temperature	180 °C	356 °F
Colour	Black
Angle
Material	Silicone
Reinforcement	3Ply
Conforms To	SAE J20R1 A
Country of Manufacture	United Kingdom
Part Number	SH-CAP-19-BLK

Silicone Material Specification

Specification
Tested to BS903 at pressed and cured for 5 minutes at 115°C.
Hardness (IHRD)	65 + 5
Density (g/cm3)	1.26 + 0.03
Tensile strength (Mpa)	7 min
Elongation at break (%)	200 min
Tear strength (KN/m)	11 min
Compression set (%)	18 Max

Silicone Hose Blanking Cap Length

T7Design Silicone Hose Caps Size Drawing

ATTENTION

Please double check that you are ordering the correct diameter for your application prior to checkout.

More Information

More Information
Manufacturer	T7Design
Inner Diameter	19mm
Hose Length	40mm
Ply	3
Colour	Black

Reviews

T7Design Silicone Hose Blanking Cap - 19mm Inner Diameter, 3Ply - Black

T7Design Silicone Hose Blanking Cap - 19mm ID, 3Ply - Black