T7Design Silicone Hose 50.8mm Inner Diameter , 4Ply, 1 Meter Long - Black
£36.60
£36.60
In stock
P/N
SH-S-51-BLK
T7Design Silicone Hose 50.8mm ID , 4Ply, 1 Meter Long - Black
Our highly flexible silicone hoses are manufactured to the highest standard and are perfect for many applications including radiator pipes and air/intake pipes within modern engines. Depending on the diameter required, the hoses come with 3-5 ply of polyester fabric with a minimum wall thickness of 4.0mm. The hoses are available from 6mm to 152mm inside diameter sizes and all meet the requirements of SAE J20R1 Class A. Working Temperature -50°C to +180°C. Material Specification Silicone CompoundTested to BS903 at pressed cured for 5 minutes at +115°C. Hardness (IHRD) 65 + 5, Density (g/cm3) 1.26 + 0.03, Tensile strength (Mpa) 7 min, Elongation at break (%) 200 min, Tear strength (KN/m) 11 min, Compression set (%) 18 Max.
| Specification | Metric | Imperial & Other |
| Inside Diameter | Ø 50.8mm | Ø |
| Length | Ø1m | Ø |
| Hose Wall Thickness | Ø4.5mm | Ø |
| Working Pressure | 14.7 BAR | 214 PSI |
| Burst Pressure | 44 BAR | 642 PSI |
| Minimum Temperature | -50 °C | -58 °F |
| Maximum Temperature | 180 °C | 356 °F |
| Colour | Black | |
| Angle | ||
| Material | Silicone | |
| Reinforcement | 4Ply | |
| Conforms To | SAE J20R1 A | |
| Country of Manufacture | United Kingdom | |
| Part Number | SH-S-51-BLK | |
Silicone Material Specification
| Specification | ||
| Tested to BS903 at pressed and cured for 5 minutes at 115°C. | ||
| Hardness (IHRD) | 65 + 5 | |
| Density (g/cm3) | 1.26 + 0.03 | |
| Tensile strength (Mpa) | 7 min | |
| Elongation at break (%) | 200 min | |
| Tear strength (KN/m) | 11 min | |
| Compression set (%) | 18 Max | |
ATTENTION
- Please double check that you are ordering the correct diameter for your application prior to checkout.
| Manufacturer | T7Design |
|---|---|
| Inner Diameter | 50.8mm |
| Hose Length | 1000mm |
| Angle | Straight |
| Ply | 4 |
| Colour | Black |
Write Your Own Review