Siroco - Sanoa 4 x OpenClose EVAP Unit 3 Speed 12v

Sanoa - 4 x Open/Close EVAP AC Unit 3 Speed 12v

One of Siroco's most powerful Air Conditioning unit, the Sanoa is perfect for a wide range of vehicles with small interior volumes, these units are compact for their power.

A pair of lightweight centrifugal fans are used to blow air through the air conditioning core and expel it through the open front panel. The fans have an onboard 3 speed resistor pack for fan control. This unit is perfect for custom applications where you can create a custom front panel or integrate into an existing plenum chamber.

Onboard electronic thermostat to prevent condensation from freezing and blocking the air conditioning core.

Please wire up the AC unit as per the wiring diagram below, if you have any questions please don't hesitate to get in touch with us.

Condenser Fan: If you are mounting your condenser radiator in front of your engine radiator then you may use your existing electric engine radiator fan to cool the condenser when required. You simply need to 'T' into the trigger feed on the electric fan relay. If you are installing this into a classic car with a viscous fan then you will need an additional electric fan on the front of the condenser.

Fan Control Switch: The fan uses an onboard resistor pack, therefore only a 4 position switch is required to operate.

ATTENTION

• Please note that this unit does not have a heater core, please see our HVAC models for a combined Heat/AC system.
• This is not a complete kit, you will require a 4 Position Fan Switch, A/C ON/OFF Switch, a Condenser radiator, a Compressor, a Receiver/Dryer Bottle, Binary or Trinary Switch, Hoses etc.