Siroco 12v/96v Sanoa HVAC B-D-F Electric Heater and A/C 12v 240-400v
Siroco 12v/96v E-Sanoa HVAC B-D-F - Electric Heater and AC Unit, 12v Blower
One of our most powerful Air Conditioning unit, the Sanoa is now available as a 12v/96v electric version, perfect for electric vehicles with small interior volumes, these units are compact for their power.
A pair of lightweight centrifugal fans are used to blow air through the air conditioning and heating cores, expelling it through the open front panel. The fans have an onboard 3 speed resistor pack for fan control. This unit is perfect for custom applications where you can create a custom front panel or integrate into an existing plenum chamber. a 6 x 55mm outlet panel is also available.
This unit also benefits from an onboard electronic thermostat to prevent condensation from freezing and blocking the air conditioning core, along with a safety cut off thermostat to prevent the PTC heater element from overheating.
| Specification | Metric | Imperial & Other |
| Cooling Capacity | 4 kw | 13649 BTU |
| Heating Capacity | 2.4 kw | 9213 BTU |
| Airflow | 420 m3/hr | 247 cfm |
| Weight | 4.6 kg | 10.14 lbs |
| High Pressure Connection | 5/8"-18 UNF-2B (3/8" SAE) O-Ring Male | |
| Low Pressure Connection | 7/8"-18 UNS-2B (5/8" SAE) O-Ring Male | |
| Blower Voltage | 12v | |
| Blower Current Continuous | 16.66a | |
| Blower Power Consumption | 200w | |
| PTC Voltage | 12v | |
| PTC Current Continuous | 13.3a | |
| PTC Power Consumption | 160W | |
| Fan Speeds | 3 Speed | |
| Enclosure Construction | ABS Plastic Enclosure | |
| AC Core Design | Copper Tubes with Pressfit Aluminium Fins | |
| Refrigerant Compatibility | R-12, R-22, R-134a, R-502, MP39, MP66, R404a, R1234yf | |
| Part Number | 0300-1010 | |
| Quantity | Item |
| 1x | E-Sanoa HVAC B-D-F Unit 12v/96v |
| 2m | 10mm Drain Hose |
| 1x | 10mm 'T' Piece |
| 4x | Right Angled BZP Steel Mounting Brackets |
| 4x | Bolts & Serrated Washers |
Please wire up the AC unit as per the wiring diagram below, if you have any questions please don't hesitate to get in touch with us.
Condenser Fan: If you are mounting your condenser radiator in front of your engine radiator then you may use your existing electric engine radiator fan to cool the condenser when required. You simply need to 'T' into the trigger feed on the electric fan relay. If you are installing this into a classic car with a viscous fan then you will need an additional electric fan on the front of the condenser.
Fan Control Switch: The fan uses an onboard resistor pack, therefore only a 4 position switch is required to operate.
The purple Safety Thermostat wires are not polarity sensitive and so it does not matter which way around they are connected.
| Location | Wire Colour | Use |
| Blower | Yellow | Low Speed |
| Blower | Orange | Medium Speed |
| Blower | Red | High Speed |
| Blower | Black | 12v Earth |
| Safety Thermostat | Purple 1 | PTC Relays |
| Safety Thermostat | Purple 2 | 12v Earth |
| Anti Freezing Thermostat | Red +V | A/C Switch |
| Anti Freezing Thermostat | Black 0V | 12v Earth |
| Anti Freezing Thermostat | Black A/C | Pressure Switch |
| Pin Location | Wire Colour | Use |
| 4, 5, 6, 7, 8, 9 | Red | 96v + |
| 1, 2, 3, 10, 11, 12 | Black | 96v |
- Please note that this unit requires a 96v supply for the heater unit and is only suitable for electric vehicles.
- Due to the 12v/96v circuit, this unit must be installed by a trained professional only.
- This is not a complete kit, you will require a 4 Position Fan Switch, A/C ON/OFF Switch, a Condenser radiator, a Compressor, a Receiver/Dryer Bottle, Binary or Trinary Switch, Hoses etc.
| Evaporator Type | AC & Heat |
|---|---|
| Fan Speeds | 3 Speed |
| Voltage | 400v DC |
| Motor Type | Brushed |
| Manufacturer | Siroco |