Polyurethane Push Fit Hose Cutter
Polyurethane Push Fit Hose Cutter
Introducing our new, lightweight hose cutter designed to cut Polyurethane push fit hose with ease. The benefits of this hand-held hose cutter, other than its small and nimble size, is that it ensures each cut is clean and direct without causing the end of the hose to form an oval shape. Having a clean, straight cut on our range of Polyurethane hose is essential to sealing within the fitting, secures hose fitment and avoids any air or fluid leaks.
We hold a large range of push fit hose joiners, push fit hose threaded fittings and Polyurethane (PU) push fit hose in stock which are suitable for many applications in the Automotive, Engineering and Commercial industry.
| Specification | Metric | Imperial & Other |
| Weight | 0.02kg | 0.04lbs |
| Overall Length | 79.5mm | 3.12" |
| Overall Width | 24.5mm | 0.96" |
| Overall Height | 33.5mm | 1.31" |
| Hose Cutter Material | Polyoxymethylene (POM) | |
| Colour | Orange | |
| Compatibility | For Polyurethane (PU) Hose | |
Installing and removing both threaded and push fit hose fittings.
Please use a suitable tool to fasten and remove the fittings through the outer hexagon or inner hexagon of the fitting body. When tightening the fittings threads, please refer to the recommended torque amount listed in the recommended torque values information above. If the torque amount exceeds the recommended value, it can cause stress to the threads and may cause the fitting to break, or the gasket to deform and cause the fitting to leak.
Cutting, preparing and installing your Polyurethane hose.
When cutting your Polyurethane hose, please ensure that the cut surface of the hose is completely vertical to avoid the pipe forming an oval. It is recommended that once you have inserted your pipe to your fitting or joiner, please pull the pipe to confirm that it is completely secured into the locking ring.
Removing push fit hose from any threaded fittings and joiners.
When removing push fit hose, please make sure that the internal pressure is zero. Please press the release ring evenly before removing the push fit hose. If the release ring is not completely compressed, you can strain the hose and tube debris could remain inside of the fitting.
- Please double check you are ordering the correct size and quantity prior to checkout.
| Manufacturer | T7Design |
|---|