Kalori 4.25kw AK 260 S Heater, 3 Speed 24v Blower. 83.0012.01.8101
£120.00
£120.00
In stock
P/N
0A5-2A7-2B9
Kalori 4.25kw AK 260 S Heater, 3 Speed 24v Blower, Integrated Valve for Cable control 83.0012.01.8101
A very small heater with water circulation. Optimal for quadricycles and microcars and for small building and goods handling equipment.
A silent 65dB fan/blower. Heating power 4.25kW.
| Specification | Metric | Imperial & Other |
| Heat Performance | 4.25 kw | |
| Airflow | 195 m3/hr | 115 cfm |
| Weight | 1.3 kg | 2.866 lbs |
| Size L x W x H | 202 x 162(223 inc. valve) x 176 mm | 7.95" x 6.37"(8.78") x 6.93" |
| Hose Size | ∅ 16mm | ∅ 5/8" |
| Voltage | 24v | |
| Power Consumption | 50w | |
| Fan Type | Single Centrifugal Fan | |
| Fan Speeds | 3 Speed | |
| Heater Core Design | Copper Tube with Aluminium Fin | |
| Our Part Number | 0A5-2A7-2B9 | |
Wiring Information
This heater uses a 3 speed single wheel centrifugal blower using an onboard resistor pack. You will need to use a 4 position fan speed switch to operate the fan, sold separately.
| Wire Colour | Use |
| 1x Orange | +12v High Speed |
| 1x Red | +12v Medium Speed |
| 1x Yellow | +12v Low Speed |
| 1x Black | Earth / Ground |
Please ensure your supply is fused appropriately, it is recommended to use a fuse twice that of the continuous running current and ensure your cable is rated to handle a higher capacity than the fuse.
ATTENTION
- Please note that a corrosion inhibitor such as glycol or anti-freeze should be used to prevent corrosion and prolong the useful life of all components used in the vehicles cooling system.
| Fan Speeds | 3 Speed |
|---|---|
| Motor Type | Brushed |
| Hose Size | 16mm |
| Voltage | 24v DC |
| Manufacturer | Kalori |
Write Your Own Review