Pierburg EVP-40 12V Electric Vacuum Pump (7.07254.03.0)
£171.20
£171.20
In stock
P/N
EVP-40
Pierburg Vacuum Pump - EVP-40 (7.07254.03.3) - 12 VDC
The Pierburg Electrical 12 VDC Vacuum Pump is designed for Hybrid, E-Mobility or where a mechanical vacuum pump may not be desirable or simply not available.
Electrical CWA coolant pumps offer top performance. They can be used for the main cooling of the combustion engine, EV inverter cooling, battery cooling and Fuel Cell stack cooling, amongst other applications.
Maximum allowable duty cycle is 50%, with a maximum run time of 45 seconds.
Additional components require for operation are vacuum/pressure switch wired into a 40a relay.
| Specification | Metric | Imperial & Other |
| Nominal Diff. Pressure | -900 mbar | -13.05 PSI |
| Weight | 1.35 kg | 2.97 lbs |
| Hose Size | Ø 9.5 mm | Ø 0.37 |
| Hose Connector | SAE 3/8" J2044 | |
| Voltage Nominal | 12 VDC | |
| Voltage Range | 9 - 16 VDC | |
| Maximum Current Draw | 7 - 11.5 A | |
| Electrical Consumption | 84 - 138 W | |
| Protection | 6K9K Rated | |
| Manufacturer | Pierburg | |
| Part Number | EVP-40 / 7.07254.03.3 | |
Wiring Information
| Wire Colour | Use | |
| RED | Positive | |
| BROWN | Negative | |
Connector Part Numbers
| Part | Description | Part Number |
| 1x Plug (Male) | FEP 2 Way | 42122900 (1J0973752) |
| 2x Terminal | Tyco 1.5-2.5mm | 969043-1 |
| 2x Seal | FEP 1.5-2.5mm | 46022300 |
Plug, terminals and seals sold separately.
Dimensions
ATTENTION
- The vacuum pump must be installed upright with the mounting bobbins facing down.
- Maximum allowable duty cycle is 50%, with a maximum run time of 45 seconds.
- Please note that no mating electrical connector kit is included, these are available to purchase seperately.
- An inline pressure switch is required to activate the pump as there is no onboard sensing.
| Manufacturer | Pierburg |
|---|
Write Your Own Review