Our race spec Titanium hardware is manufactured from only the best aircraft grade Titanium Alloy; Ti-6AL-4V (Grade5), our fasteners are fully forged and the threads are created using a superior rolling process, this results in greater fatigue resistance and can reduce the potential of galling when fastening.
Grade 5 Titanium fasteners are suitable as replacement bolts for Grade 8.8 steel fasteners, they have a good strength to weight ratio and offer weight savings of approximately 45% over that of equivalent steel bolts. As well as the obvious weight savings, Titanium has outstanding corrosion resistance to a wide range of aggressive chemicals resulting in a longer service life over standard BZP steel bolts.
Please note that Ti fasteners are not suitable for applications that are spec'd for Steel bolts greater than ISO grade 8.8.
Specification
Metric
Head Type
Flanged Hex Locknut
Material
Titanium Grade 5 also known as Ti-6AL-4V, Ti 6-4
Manufacture
Fully Forged
Ultimate Tensile Strength
150,000 PSI
Yield Strength
120,000 PSI
Density
4420 kg/m³
Quantity
1 Piece
General Use Torque Values
Thread Size
M3
M4
M5
M6
M8
M10
M12
Max Torque N m
1.7
3.6
6.9
11.1
28.3
57.6
97.5
Max Torque lb ft
1.3
2.6
5.1
8.2
20.9
42.5
71.9
Please note that it is recommended to apply anti seize or copper based paste to the bolt threads to prevent galling.
Bolt Measurements
Thread
Pitch
A
B
C
D
M4
0.7
10
6.9
1.5
4.5
M5
0.8
11.8
7.9
1.3
5.0
M6
1.0
13.8
9.9
1.7
6.0
M8
1.25
15.8
11.9
1.9
7.9
M10
1.25
18.8
13.9
2.3
9.9
M12
1.25
23.8
16.9
2.5
10.9
ATTENTION
Please double check you are ordering the correct sizes prior to checkout.
Do NOT use Ti bolts to substitute mild steel bolts above grade 8.8.
