T7Design Honda Civic FN2 RHD 52mm Air Vent Gauge Holder
£30.00
£30.00
In stock
P/N
D1E-172-B00
3D Printed RHD Honda FN2 Civic Gauge Holder for 52mm Gauges.
A custom designed 3D Printed gauge holder designed to take a 52mm diameter gauge that can be mounted in place of the OEM air vent to the right of the steering wheel on RHD cars.
To fit you will need to carefully pry off the heater control panel (it is recommended to use thin plastic pry bars to prevent damage to the surrounding dash panel). Using a Philips head screw driver remove the 3 screws holding the air vent in place, swap in the gauge holder and use the three screws to fasten the holder into place. You are now free to install your gauge and re-fit the panel.
If you need a holder to fit a special gauge size please get in touch.
| Part Specification |
| To fit 52mm diameter Gauges. |
| 3D Printed using a commercial grade Stratasys F270 3D Printer. |
| Printed in super strong ABS+ material. |
| Fits in place of the original air vent to the right of the steering wheel (RHD). |
ATTENTION
- We have other variations available to fit 52 or 60mm gauges.
| Honda Vehicle Code | FN2 |
|---|---|
| Vehicle Model | Civic |
| Manufacturer | T7Design |
Write Your Own Review