13-13mm (1/2"-1/2") Bulkhead Hose Adapter Single

13 - 13mm Bulkhead Hose Adapter Single

These handy bulkhead hose adapters are CNC machined from aluminium billet to a high quality surface finish. The hose adapters allow a water tight connection for the heater hose between the interior space and the engine compartment. Some motorsport regulations require a solid connection (rather than rubber grommets) to be used to pass engine coolant through the firewall. They also allow you to step up or down a hose size at the bulkhead, perfect if your installing an aftermarket heater that has differen't sized hose connections to those on the engine.

Sold singularly allowing the hose adapters to be installed independently of each other. The plate is designed to be riveted or bolted onto the bulkhead and prevents the adapter from spinning when tightening up the M16 nut on the reverse side. The bulkhead fittings and spacer plate can be polished with little effort.

These are available in different diameters and mounting plate widths.

ATTENTION

• Please double check that you are ordering the correct diameter for your application.