Brian Crower Billet Cams Stage 3 NA RSX Type S

Brian Crower Billet Cams Stage 3 NA RSX Type S K20 K20A K20A2 K20Z K20Z1

Brian Crower is known for making high quality camshafts that make power without breaking the bank. There is no other cam manufacturer on the market that gives you more value for your dollar, and the parts just work. We use them in our own cars and we encourage our customers to use them as well.

The newest engine in the Honda tuning community. The "K Series" is Honda's mass produced version of the roller rocker valve train assembly found in the S2000. Less friction, more rpm potential, faster action cam profiles...this engine has untapped potential. First introduced in the JDM Integra Type-R in 2001, this engine put out a respectable 220HP @ 8000 rpm straight from the factory (DC5). The K20A also sees service in the JDM Civic Type-R, using the same compression and cam profiles. The first USDM production model was the K20A2 found in the 02-04 RSX-S. Other engines featuring the same head configuration include the K24A2 (TSX) that features a 9.114" deck height, the K20Z1 in the 05-06 RSX-S that includes various JDM Type-R add-ons like cams, throttle bodies, higher compression and Honda's answer to the tuning crowd, the K20Z3 found in the 2006-up Civic Si.

Intended for fully built engine. Extensive modifications, high compression pistons. Also works on K24 all motor. Requires kit BC0040 or BC0040S.

Stage 3 Normally Aspirated Specification:

• Intended for fully built engine. Extensive modifications, high compression pistons. Also works on K24 all motor. Requires kit BC0040 or BC0040S.
• Rocker Ratio: 1.75:1 mid, 1.7:1 sec, 1.7:1 pri.
• Note: BC0042 and BC0043 ductile iron cam cores have been replaced with 8620 steel billet cam cores. Please see below for BC0042-2 and BC0043-2 specs and pricing.

ATTENTION

• WARNING: If running a late model cylinder head (after 2004), you may need to purchase BC2940 keepers to accommodate the BC2010 or BC2011 retainers. Honda changed the keeper groove angles, therefore your stock keepers/locks may not fit the BC retainers properly causing potential damage.