12v & 24v 30a PWM Controller 0-5v Input
£139.68
£139.68
In stock
P/N
B3C-2B1-A23
12v / 24v DC PWM Power Fan Controller 30a, 0-5v Input
The 30a PWM Controller allows the user to control high direct current loads (DC Fans, lamps, heating, LEDs with protective resistors, etc). These can be used to give infinite adjustment to single speed blowers.
PLEASE NOTE: No Potentiometer is included with the controller.
| Specification | |
| Operating Voltage | 10.5 - 31 VDC |
| Nominal Voltage | 12 VDC / 24 VDC |
| Max Current Capacity | 30a continuous |
| Control Range | Approx. 0 - 100% |
| Input Control | 0-5v Pot 2 Wire |
| Operation | Minimum speed: 0% at Vmin= 0V Maximum speed: 100% at Vmax= 5V |
| Permissible Loads | Direct current motors, incandescent lamps, LEDs with protective resistors. |
| Protection | IP20 |
| Our Part Number | B3C-2B1-A23 |
Dimensions
ATTENTION
- This device will still need an ON/OFF switch, simply rotating the Pot to 0% will not turn off the controller.
- For use with our 2 wire single speed fans only.
- No potentiometer is supplied
| Manufacturer | Kalori |
|---|
Write Your Own Review