M12 Titanium Washer Ti-6Al-4V
£2.10
£2.10
In stock
P/N
AFC-243-C54
M12 Titanium Washer Ti-6Al-4V
Our race spec Titanium washers are manufactured from only the best aircraft grade Titanium Alloy; Ti-6AL-4V (Grade5). Grade 5 Titanium fasteners are suitable as replacement bolts for Grade 8.8 steel fasteners, they have a good strength to weight ratio and offer weight savings of approximately 45% over that of equivalent steel bolts. As well as the obvious weight savings, Titanium has outstanding corrosion resistance to a wide range of aggressive chemicals resulting in a longer service life over standard BZP steel bolts.
Please note that Ti fasteners are not suitable for applications that are spec'd for Steel bolts greater than ISO grade 8.8.
| Specification | Metric |
| Material | Titanium Grade 5 also known as Ti-6AL-4V, Ti 6-4 |
| Ultimate Tensile Strength | 150,000 PSI |
| Yield Strength | 120,000 PSI |
| Density | 4420 kg/m³ |
| Quantity | 1 Washer |
Washer Measurements
| Inner Diameter (mm) | Outer Diameter (mm) | Thickness (mm) | Weight (g) |
| M5 | 10 | 1.0 | 0.3 |
| M6 | 12 | 1.6 | 0.4 |
| M8 | 16 | 1.6 | 1.0 |
| M10 | 20 | 2.0 | 2.0 |
| M12 | 24 | 2.5 | 3.5 |
ATTENTION
- Please double check you are ordering the correct sizes prior to checkout.
- Do NOT use Titanium to substitute mild steel above grade 8.8.
| Manufacturer | T7Design |
|---|
Write Your Own Review