Titanium Flanged Nuts Ti-6Al-4V
Our race spec Titanium hardware is manufactured from only the best aircraft grade Titanium Alloy; Ti-6AL-4V (Grade5), our fasteners are fully forged and the threads are created using a superior rolling process, this results in greater fatigue resistance and can reduce the potential of galling when fastening.
Grade 5 Titanium fasteners are suitable as replacement bolts for Grade 8.8 steel fasteners, they have a good strength to weight ratio and offer weight savings of approximately 45% over that of equivalent steel bolts. As well as the obvious weight savings, Titanium has outstanding corrosion resistance to a wide range of aggressive chemicals resulting in a longer service life over standard BZP steel bolts.
Please note that Ti fasteners are not suitable for applications that are spec'd for Steel bolts greater than ISO grade 8.8.
| Specification |
Metric |
| Head Type |
Flanged Hex Locknut |
| Material |
Titanium Grade 5 also known as Ti-6AL-4V, Ti 6-4 |
| Manufacture |
Fully Forged |
| Ultimate Tensile Strength |
150,000 PSI |
| Yield Strength |
120,000 PSI |
| Density |
4420 kg/m³ |
| Quantity |
1 Piece |
| Thread Size |
M3 |
M4 |
M5 |
M6 |
M8 |
M10 |
M12 |
| Max Torque N m |
1.7 |
3.6 |
6.9 |
11.1 |
28.3 |
57.6 |
97.5 |
| Max Torque lb ft |
1.3 |
2.6 |
5.1 |
8.2 |
20.9 |
42.5 |
71.9 |
Please note that it is recommended to apply anti seize or copper based paste to the bolt threads to prevent galling.
| Thread |
Pitch |
A |
B |
C |
D |
| M4 |
0.7 |
10 |
6.9 |
1.5 |
4.5 |
| M5 |
0.8 |
11.8 |
7.9 |
1.3 |
5.0 |
| M6 |
1.0 |
13.8 |
9.9 |
1.7 |
6.0 |
| M8 |
1.25 |
15.8 |
11.9 |
1.9 |
7.9 |
| M10 |
1.25 |
18.8 |
13.9 |
2.3 |
9.9 |
| M12 |
1.25 |
23.8 |
16.9 |
2.5 |
10.9 |
ATTENTION
-
Please double check you are ordering the correct sizes prior to checkout.
-
Do NOT use Ti bolts to substitute mild steel bolts above grade 8.8.
