EBP23 Davies Craig Electric Water / Booster Pump Kit 12v
Davies Craig EBP23 Electric Booster Water Pump Kit, 12v
The EBP23 is a 'brushless' 12 volt, high-flow (23 litres/6.08 US gallons per minute), magnetically-driven water pump.
The EBP motor has no brushes to wear out. The pump is magnetically driven by the motor, which means that no shaft sealing is required.
The many EBP applications include use as a booster for car heater and LPG systems, solar and marine applications, water-cooled motorcycle, go-kart engines, turbo air/water intercoolers, caravans, motor homes and domestic irrigation.
| Specification | Metric | Imperial & Other |
| Flow Rate (Max) | 23 L/min | 6 US Gal/min |
| Min Temperature | -40 °C | -40 °F |
| Max Temperature | 120 °C | 248 °F |
| Inlet / Outlet Size | 19 mm | 3/4" |
| Max Pressure | 0.25 BAR | 3.63 psi |
| Weight | 0.36 kg | 0.8 lbs |
| Burst Pressure | 250 kPa | 36 psi |
| Nominal Voltage | 12V DC | |
| Operating Voltage | 9-15V DC | |
| Max Current | 1.5A @ 12V DC | |
| Pump Design | Centrifugal | |
| Pump Material | Nylon 66, 30% glass-filled | |
| Warranty | 24 Months | |
| Manufacturer Part Number | 9050 | |
| Quantity | Description |
| 1x | EBP23 12v Electric Water Pump |
| 1x | Mounting Bracket |
| 2x | Stepped Adapters - 19, 16, 12.5mm |
| 2x | Hose |
| 4x | Hose Clamps |
PLEASE NOTE: This is a pump only kit. The pump can be controlled via the following methods:
1. Continuous Running: The pump can be wired direct to the battery for continuous running, this is the simplest way to wire in the pump.
2. Thermatic Fan Switch: Combined with a fan switch the pump can be wired to activate at a specified temperature.
- The EBP is a recirculating pump which is ideal for a 'closed system', similar to an automotive cooling system. It is not self-priming.
| Voltage | 12v DC |
|---|---|
| Hose Size | 19mm, 3/4" |
| Manufacturer | Davies Craig |