5kW 400VDC High Voltage Electric Water Heater

The High Voltage Water Heater has been designed for heating circuits for battery packs or interior cabins in Electric Vehicles. It consists of several tubular heating elements and has been validated according to automotive standards to meet the highest safety requirements. Its integrated power electronics allows for individual control via LIN bus.

Suitable for: Battery pack heating, and heating for the interior cabin via a hydronic heater in fully electric, hybrid vehicles and special vehicles, e.g. electric buses, commercial vehicles, cranes, excavators, etc.

PLEASE NOTE: No electrical connectors included, these must be purchased seperately.

FEATURES & BENEFITS

Power up to 5kW (7kW Boost)
Can be operated at a voltage range of 280 - 450V DC (350 - 450V DC Boost)
Integrated LIN control module
Integrated temperature sensor controller
Heating system in direct contact with medium (high efficiency & short heat-up time)
Lightweight (<2kg)
Low Voltage Circuit Connector (LVC): Tyco FLA-STE-GH1,5RD 2x4p 964852; Mating connector: Tyco 2x4p 1394416-1
High Voltage Circuit Connector (HVC): Tyco HVA 280-2P 1-2103124-5 (Key E); Mating connector: Tyco 5-2208102-0

Specifications

Heating capacity (kW)	5
Heating capacity Boost (kW)	7 (up to 140% performance)
Rated voltage (V)	280 – 450 DC
Rated voltage Boost at 7kW (V)	350 – 450 DC
Flow rate min. (l/h)	360 – 840 600 (Boost >5kW)
Max. current (A)	40
Operating temperature (°C)	-40 to +110
Weight (kg)	1.7
Dimensions L x W x H (mm)	210 x 73 x 175
Communication interface	LIN Bus
Fluid connection (mm)	20 (Nozzle dimensions according to DIN3021-3)
Coolant type	Mono-ethylene glycol
Mixture ratio	Water:glycol = 40:60 to 60:40

Dimensions

ATTENTION

No electrical connectors included, these must be purchased seperately.

More Information

More Information
Manufacturer	DBK Industrial

Reviews