Sanden SD7B10 7176 100cc Compressor Poly-V 6 Rib 112mm 12v PAD
£175.00
£175.00
In stock
P/N
40405081
Sanden SD7B10 7176 Poly-V 6 Rib Compressor PAD 12v
Sanden are the manufacturer of choice for OEM's where quality and reliability are the number one requirement, they are the leaders in their field and we wouldn't recommend any other brand for our customers.
We stock a wide range of compressors including multiple drive types, power output and suction and discharge port locations.
| Compressor Specification | Metric | Imperial & Other |
| Weight | 4.5 kg | 9.9 lbs |
| Displacement Per Revolution | 99.8cc | |
| Refrigerant Compatibility | R134a | |
| Suction Fitting | See PAD to O-Ring Adapter | |
| Discharge Fitting | See PAD to O-Ring Adapter | |
| Connection Type | PAD | |
| Compressor Oil | 100cc of PAG 46 or Equiv | |
| Mount Type | SD7B Swing Alternator 2 Top 2 | |
| Warranty | 12 Months against manufacturing defects | |
| Rotation | Clockwise | |
| Manufacturer | Sanden | |
| Manufacturer Part Number | SD7B10 7176 | |
| OEM Part Number | 7176 | |
| Our Part Number | 40405081 | |
| Clutch Specification | Metric | Imperial & Other |
| Pulley Diameter | Ø 112 mm | Ø 4.41" |
| Voltage | 12v DC | |
| Power Consumption | 48 W Continuous | |
| Current Draw | 4a Continuous | |
| Belt Type | Type 'A' - Double V | |
| Connector | 1 Wire Male Bullet | |
Dimensions
ATTENTION
- Please double check belt type, voltage and inlet/outlet location is compatible with your application prior to checkout.
- WARRANTY: Please note that if you are replacing a failed compressor you MUST also install a new dryer bottle and perform a full system flush to remove all dirt and particles in the system. Failure to do so will invalidate your warranty. For further information please review the "Compressor Service Guide" under the 'Product Downloads' section above.
| AC Connection Type | PAD Mount |
|---|---|
| Designation | SD7B10 |
| Port Exit | Top / Vertical |
| Belt Type | Poly-V 6 Groove |
| Manufacturer | Sanden |
Write Your Own Review