Kalori 3.4kw Alize 2 Ducted Water Heater, 24v Blower, 4x 55mm Outlets 120.14.402
£262.32
£262.32
In stock
P/N
3D8-2CD-04A
Kalori 3.4kw Alize 2 Heater, 24v Blower, 4x ∅55mm Outlets
A very small heater with water circulation. Optimal for quadricycles and microcars and for small building and goods handling equipment.
A silent fan/blower. Heating power 3.4kW.
| Specification | Metric | Imperial & Other |
| Heat Performance | 3.4 kw | |
| Airflow | 220 m3/hr | 128 cfm |
| Weight | 1.8 kg | 3.96 lbs |
| Size L x W x H | 214 x 175 x 132 mm | 8.42" x 6.89" x 5.19" |
| Hose Size | ∅ 16mm | ∅ 5/8" |
| Air Nozzle Size Out | 6x ∅ 55mm | 6x ∅ 2.17" |
| Air Nozzle Size In | 2x ∅ 100mm | 2x ∅ 3.94" |
| Voltage | 24v | |
| Power Consumption | 70w | |
| Fan Type | Single Centrifugal Fan | |
| Fan Speeds | 3 Speed | |
| Heater Core Design | Copper Tube with Aluminium Fin | |
| Our Part Number | 3D8-2CD-04A | |
Wiring Information
This heater uses a 3 speed single wheel centrifugal blower using an onboard resistor pack. You will need to use a 4 position fan speed switch to operate the fan, sold separately.
| Wire Colour | Use |
| 1x Orange | +24v High Speed |
| 1x Red | +24v Medium Speed |
| 1x Yellow | +24v Low Speed |
| 1x Black | Earth / Ground |
Please ensure your supply is fused appropriately, it is recommended to use a fuse twice that of the continuous running current and ensure your cable is rated to handle a higher capacity than the fuse.
Dimensions
ATTENTION
- Please note that a corrosion inhibitor such as glycol or anti-freeze should be used to prevent corrosion and prolong the useful life of all components used in the vehicles cooling system.
| Air Hose Size | 55mm (2.17") |
|---|---|
| Fan Speeds | 3 Speed |
| Motor Type | Brushed |
| Hose Size | 16mm |
| Voltage | 24v DC |
| Manufacturer | Kalori |
Write Your Own Review