Phillips & Temro Wolverine PAD Heater Electric 3.75 x 4.25" 250w 115v (CSA)
£117.00
£117.00
In stock
P/N
3400121
3400121 Wolverine Silicone PAD Heater Electric 3.75 x 4.25" 250w 120v
Adhesive Silicone Pad Heaters for Engine Oil, Transmission Fluid, Reservoir and Hydraulic Fluid.
Operating in extreme conditions requires dependable solutions. Give your engine the help it needs to start in the coldest weather by installing silicone pad heaters. These heaters are designed to provide warmth to areas with fluid susceptible to freezing or thickening. Electric heating pads are designed to be applied directly to the source, resulting in direct heat transfer. They are a low wattage, energy efficient solution.
| Specification | Metric | Imperial & Other |
| Heat Output | 250 w | 852 BTU |
| Dimensions | 95 x 108mm | 3.75 x 4.25" |
| Thermostat Temp Spread | On @ 132°c, Off @ 149°c | On @ 270°F, Off @ 300°F |
| Cord Length | 1.8m | 6' |
| Plug Type | Type A | |
| Voltage | 120v | |
| Current Continuous | 2.1a | |
| Thermostat | Yes | |
| Fixation | Adhesive Backing | |
| Certification | CSA/US (North America) | |
| Manufacturer | Phillips & Temro Industries | |
| Part Number | 3400121 | |
What's in The Box?
The Silicone PAD Heater kit comes with the following components:
| Quantity | Description |
| 1x | Silicone PAD Heater |
| 1x | Silicone Weatherproofing Sealer |
| 1x | PAD Applicator |
| 1x | Pack of Zip Ties for Cord |
| 1x | Instructions |
Dimensions
Installation Instructions
ATTENTION
- Attach heater to metal surface only! Surface must be flat and smooth, with no bumps, ridges, or grooves. Surface must be warmed to >100°F (38°C). Do not use additional adhesives to secure heater.
- Please double check dimensions and voltage are suitable for your application prior to checkout.
- Do not cut down or trim heater pad.
- Fully read instructions prior to installation.
| Heater Type | Universal Heater |
|---|---|
| Voltage | 115v AC |
| Certification | CSA/US |
| Manufacturer | Phillips & Temro |
Write Your Own Review