Phillips & Temro Zerostart Tank Heater 240v 2.25kw 3/4" 27-38c Large NEMA 6-15 UL/CSA
£369.00
£369.00
In stock
P/N
3309056
Zerostart Thermosiphon Tank Heater
Circulation tank heaters provide dependable pre-heating for engine starts in all temperatures by circulating warmed coolant throughout the engine.
A rugged, dependable and low-cost engine pre heater solution available in multiple voltages, switching thermostat temps and heat outputs.
FEATURES & BENEFITS
- Rugged die cast, one-piece, aluminium construction.
- Regulating thermostat with automatic reset.
- Safety overheat thermostat with automatic reset.
| Specification | Metric | Imperial & Other |
| Heating Power | 2.25 kW | 7677 BTU |
| Thermostat Range | On @ 27°C, Off @ 38°C | On @ 80°F, Off @ 100°F |
| Hose Size | 19 mm | 3/4" |
| Power Cord Length | 3.6m | 12' |
| Unit Weight | 1.53 kg | 3.37 lbs |
| Voltage | 240 v AC | |
| Tank Size | Large | |
| Plug Type | Hard Wire | |
| Overheat Protection | Safety overheat thermostat with automatic reset | |
| Construction | Rugged die cast, one-piece, aluminium construction | |
| Conformity | N/A | |
| Warranty | 2 Years from Date of Purchase | |
| Manufacturer | Manufactured in the USA by Phillips & Temro Industries | |
| Part Number | 3309056 | |
What's In The Box?
| Quantity | Description | |
| 1x | Engine Heater | |
| 1x | Mounting Bracket & Hardware | |
| 1x | Installation Instructions |
Dimensions
ATTENTION
- Please thoroughly read the provided instructions prior to use. Damage caused by incorrect installation, use or maintenance will invalidate the warranty.
- Phillips & Temro Engine Heaters are not compatible with any radiator sealant, radweld, cooling system stop leak, leak repair etc. Using the heater in conjunction with these chemicals will invalidate the warranty.
| Cable Length | 1.5 M |
|---|---|
| Plug Type | Hard Wire |
| Voltage | 230v AC |
| Heater Power | 2250w |
| Hose Size | 19mm |
| Manufacturer | Phillips & Temro |
Write Your Own Review