Calix 2500W Electric Vehicle Heater 28.5VDC & 230VAC
£856.74
£856.74
In stock
P/N
2406813
2406813 - Calix 2500W Electric Vehicle Heater 28.5VDC & 230VAC with NTC Temperature sensor output.
Calix 28,5 V DC heater, designed to heat applications such as coolant circuits that does temper the cabin and battery packs in electrical vehicles. Intended for use in key on mode.
This ESS Heater is also fitted with an integrated 230V parking heater that is intended for pre-heating the system in key off mode.
| Specification | Metric | Imperial & Other |
| Heating Power (@28.5v) | 2500 W | 8530 BTU |
| Heating Power (@230v) | 1500 W | 5118 BTU |
| Operating Temperature | -40°c to +90°c | -40°F to 194°F |
| Connector Size | Eyelet for M8 | |
| Coolant Pressure | 100 kPa | |
| Coolant Flow requirement | Min 5 l/min | |
| Operating Voltage (Key on Mode) | 28.5 V DC | |
| Operating Voltage (Key Off Mode) | 230 V AC | |
| Manufacturer | Manufactured in Sweden by Calix | |
| Part Number | 2406813 | |
Dimensions
ATTENTION
- Please thoroughly read the provided instructions prior to use. Damage caused by incorrect installation, use or maintenance is not covered.
- Calix Engine Heaters are not compatible with any radiator sealant, radweld, cooling system stop leak, leak repair etc. Using the heater in conjunction with these chemicals will invalidate the warranty.
| Manufacturer | Calix |
|---|
Write Your Own Review