TX1 Heater Valve - 16mm (5/8") - Push to Close
£12.92
£12.92
In stock
P/N
1BD-84D-28C
16mm (5/8") TX1 Heater Valve - Push to Close
A high-quality metal valve commonly fitted to TX1 & Fairway Driver Taxi's, classic vehicles and many kit car models due to the simplicity of the design and operation. Requires a bowden cable to operate.
| Specification | Metric | Imperial & Other |
| Hose Size | ∅ 16mm | ∅ 5/8" |
| Post Size | ∅ 4.5mm | ∅ 0.18" |
| Min Temperature | -40 °C | -40 °F |
| Max Temperature | 110 °C | 230 °F |
| Pressure Limit | 3 BAR (Gauge) | 43.5 PSI (Gauge) |
| Construction | Zinc Plated Steel | |
| Cable Required | Bowden Cable with Looped End | |
| Cable Movement | 30mm | |
| Operation | Push to Close | |
| Part Number | 1BD-84D-28C | |
ATTENTION
- Please note that this valve should only be used in a system with an added corrosion inhibitor such as glycol or anti-freeze to prevent valve corrosion.
- No bowden cable included.
| Water Control Type | Water Valve |
|---|---|
| Manufacturer | T7Design |
Write Your Own Review