Calix 24VDC 480W Fluid Heater LVHH 2448 16mm
£198.21
£198.21
In stock
P/N
1560105
1560105 - Calix 24VDC 480W Fluid Heater LVHH 2448, 16mm Hose connections with NTC Temperature sensor output.
Hose installed heater, designed to pre-heat applications such as coolant circuits. 240W @ 12 VD C or 480W @ 24V DC. The heaters are equipped with a NTC thermistor for temperature monitoring.
| Specification | Metric | Imperial & Other |
| Heating Power | 480 W | 1637 BTU |
| Operating Temperature | -40°c to +90°c | -40°F to 194°F |
| Hose Size | 16 mm | 0.63" |
| Coolant Pressure | 3 bar max | |
| Operating Voltage | 24 V DC | |
| Manufacturer | Manufactured in Sweden by Calix | |
| Part Number | 1560105 | |
Dimensions
ATTENTION
- Please thoroughly read the provided instructions prior to use. Damage caused by incorrect installation, use or maintenance is not covered.
- Calix Engine Heaters are not compatible with any radiator sealant, radweld, cooling system stop leak, leak repair etc. Using the heater in conjunction with these chemicals will invalidate the warranty.
| Cable Length | 0.3 M |
|---|---|
| Plug Type | Hard Wire |
| Voltage | 24v DC |
| Heater Power | 480w |
| Hose Size | 16mm |
| Manufacturer | Calix |
Write Your Own Review