Davies Craig Digital Thermatic Fan & EWP Controller 1/4" NPT Sensor 12v - 0445

0445 Davies Craig Digital Thermatic Fan Switch Kit & 1/4" NPT Sensor Combo 12v

The Digital Thermatic Fan Switch can sense air or coolant temperature to automatically activate the Thermatic Fans at your set/targeted temperature when extra cooling is needed.

With dual relays, the switch provides dual fan activation up to 50 Amps at an engine temperature range of 40°C to 110°C (104°F to 230°F). Equipped with a proven sensor positioned for accurate temperature readings.

• Max Voltage: 12 - 27v (For 24v use, relays need to be changed, not supplied in kit).
• Max Current: Rated to 30 amps per Fan (Maximum 40amp per Fan) Unit comes with 2 x 30 amp fuses and 2 x 40 amp relays.
• Speed Single speed, 10 second delay to start up the second fan.
• Applications: Suitable for single and dual fan applications.
• Screen Display: LED digital temp display, actual temp + set temp.
• Temp Display: Centigrade or Fahrenheit.
• Temp Settings: 40°c to 110°c (104°F to 230°F)

Please note that the Green 'switch' wire can be wired up for AC fan activation, a secondary NC (Normally Open) temperature switch or a dash mounted ON/OFF switch.

ATTENTION

• Only suitable for 12v systems.
• If using this switch for use with our EWP's, it will not vary the speed of the pump in response to engine temperature but rather turn the pump on and off at your set temperature. For EWP control, we would recommend part number 8002 which can manage both the EWP and your Thermatic Fans.