Triple Vane Ball Vent - 63mm (2.5")
£12.30
£12.30
In stock
P/N
044-C72-271
Directional Triple Vane Ball Vent to fit 63mm (2.5") Ducting.
A directional triple vane eyeball vent made from injection moulded high-strength ABS plastic with optional screw on hose connector. The vent has a triple directional flute to direct the airflow where required, these are available singularly or with a hose connector fit suit 51 or 63mm air ducting.
This is not a closable vent, simply turning the vent 90 degrees will not block off the air flow through the eyeball entirely.
| Specification | Metric | Imperial & Other |
| To Fit Hose Size | 63 mm | 2.5" |
| Outer Diameter | 62.8 mm | 2.47" |
| Hole Size | 57.5 mm | 2.25" |
| Max Panel Thickness | 5.6 mm | 0.22" |
| Minimum Temperature | -20 °C | -4 °F |
| Maximum Temperature | 80 °C | 176 °F |
| Material | High Strength ABS | |
| Part Number | 044-C72-271 | |
Product Dimensions
ATTENTION
- Please double check that you are ordering the correct diameter for your application prior to checkout.
| Air Vent Type | Ball Vane |
|---|---|
| Air Hose Size | 60 - 63mm (2.5") |
| Manufacturer | T7Design |
Write Your Own Review