PWM Controlled Electric Water Valve with Pot, Knob and Flange 12v
£75.10
£75.10
In stock
P/N
0410-0412
Potentiometer Control Electric Water Heater Valve 16mm (5/8") with Knob and Flange 12v
A fully electric heater control valve with full variable control using a 310 degree potentiometer.
This valve is designed for use within automotive heating circuits, it is compatible with all commonly found glycol mixtures.
This kit comes with a knob and flange for the potentiometer.
| Specification | Metric | Imperial & Other |
| Hose Size | ∅ 16mm | ∅ 5/8" |
| Minimum Water Temperature | -40 °C | -40 °F |
| Maximum Water Temperature | 110 °C | 230 °F |
| Weight | 0.215 kg | 0.474 lbs |
| Flow Rate | >900 L/hr | >198 gal/hr |
| Operation | Closed to 100% Open via Potentiometer | |
| Voltage | 12v | |
| Valve Rotation Angle | 90° | |
| Part Number | 0410-0412 | |
Wiring Information
This electric valve is incredibly simple to set up and operate, the valve will require a switched positive power and earth supply, along with 3 wires to connect the supplied potentiometer via the included connectors.
When voltage is applied, the valve can be controlled and adjusted via the 310 degree potentiometer.
| Wire Colour | Valve Pin | Use | Recommended Wire Size |
| 1x Red (+) | P7 | Positive Supply from Switched Ignition Source | 1.0mm² |
| 1x Black (-) | P6 | Earth / Ground | 1.0mm² |
| 1x Purple (E) | P4 | Potentiometer Final | 1.0mm² |
| 1x White (S) | P5 | Potentiometer Cursor | 1.0mm² |
| 1x Green (A) | P3 | Potentiometer Initial | 1.0mm² |
Dimensions & Wiring
ATTENTION
- This is a continuously variable valve that is controlled via the included Potentiometer.
- All required connectors and pins are included.
| Water Control Type | Water Valve |
|---|---|
| Water Hose Type | 16mm (5/8") |
| Manufacturer | Siroco |
Write Your Own Review